Intertec Microtherm Enclosure Electric Heater, 120 V, 75 W, Explosion Proof

Description

TS 10 and TS 20 thermostats are available at each
CP MICROTHERM C Electric heater HD641-2ca CP MICROTHERM C Page 1/2 1 Application Heating of instrument enclosures in hazardous areas, designed for • freeze protection • condensation protection • vertical installation 2 Special Features & Advantages • Vertical design allows for optimum installation adjacent to the instruments to be heated in the enclosure • Available freeze-protection thermostat (TSxx) and a junction box can be provided • High heat output resulting from a special, black anodized aluminium profile construction 3 Description The very versatile MICROTHERM line consists of electric heaters designed to heat the air in the enclosure by convection. Wherever possible, a heater designed for temperature class T3 should be selected. A temperature fuse is integrated in the heater that cuts off the power in case of a technical failure or excessive heating resulting from an external heat source. It should be noted that the temperature fuse must only be repaired in our factory. For reasons of operational safety the heater must only be operated under conditions that ensure that the trip temperature of the limiter will not be exceeded: • Ensure effective convection by observing the necessary clearances as per sections 7 on the next page. Allow for good convection circulation in the enclosure and take care not to cover the fins. • The TSxx thermostat or TC temperature controller can be supplied to limit or maintain the ambient temperature in the enclosure. All Intertec explosion-proof heaters can also be supplied to European ATEX standard and are also available in a cost-saving non-explosion-proof design. A temperature indicator shows potential problems and failures at an early stage (e.g. incorrect installation). Please check the application if more than 3 fields have irreversibly changed to black. Warranty null and void if Heater strip has been removed from Heater.