Intertec TS 10, TS 20 Explosion Proof Thermostats

Description

TS    Thermostat
HD225-1c TS Thermostat Page 1/2
1 Application TS .. is an explosion-proof thermostat. Designed as a two-point controller, and when connected to an electric heater, it can regulate the temperature in a housing to the pre-set, nominal set-point (see installation). The TS controller switches on when the temperature is below the set point and switches off above the set point. The TS can also be used as an alarm. In this version, the TS AM (Alarmer), switches on when the temperature is above the set point and switches off below the set point. There is either a thermostat (TS) or an alarm (TS..AM) in a housing
2 Featurepotting  Robust design with aluminium housing.  Completely encapsulated with silicone potting  ½” FNPT threaded Connection
3 Control Accuracy The air temperature in a heated housing is not the same everywhere. Depending on the difference between inside and outside temperature (delta T), insulation, configuration of the heater and the installed equipment etc., the temperature (e.g. between top and bottom) can fluctuate by 10 °C or more.